Shaanxi Heli Mechanical Engineering Co., Ltd.
+86-18392691981
Shearer Clutch Torque Shaft

Shearer Clutch Torque Shaft

Mechanical Fuse: Protects motors and gearboxes from catastrophic damage.
Precision Shear: Advanced design handles sudden stalls safely.
Premium Metallurgy: Built with high-performance aerospace-grade materials.
Rapid Recovery: Minimizes downtime for more efficient operations.
Compatible: Specifically engineered for your longwall shearers.

Send Inquiry
  • Description

    Shaanxi Heli Mechanical Engineering Co., Ltd. is one of the leading manufacturers and suppliers of shearer clutch torque shaft in China. If you're going to buy high quality shearer clutch torque shaft made in China, welcome to get more information from our factory. Customized orders are welcome.

     

    Key Features

     

    • Calibrated Shear Groove: Features a precision-engineered "weak point" designed to fracture at a specific torque limit, instantly decoupling the motor from the load during an emergency.
    • Premium Ni-Cr-Mo Alloy: Forged from high-grade steel to ensure consistent density and eliminate internal flaws that cause unpredictable failures.
    • High-Accuracy Spline Machining: Every spline is CNC-ground to achieve a perfect interference fit, reducing vibration and preventing "fretting" corrosion within the clutch assembly.

     

    Core Functions

     

    • Dynamic Torque Transfer: Acts as the primary bridge between the clutch mechanism and the transmission, ensuring smooth acceleration and deceleration of the cutting drum.
    • Overload Protection: Serves as a reliable mechanical "breaker" that snaps cleanly during high-impact rock inclusions, saving the drivetrain from millions in potential repair costs.
    • Vibration Isolation: Absorbs high-frequency torsional oscillations, protecting sensitive internal seals and bearings from premature wear.

    Primary Advantages

    21-1
    • Maximized Motor Safety: By sacrificing itself during a major jam, it ensures that your expensive electric motors remain undamaged and ready for immediate restart.
    • Rapid Downtime Recovery: Designed for easy extraction after a shear event, allowing your maintenance crew to replace the shearer clutch torque shaft and resume production in record time.
    • Optimized Service Life: Our superior heat treatment provides a toughened core that resists fatigue, ensuring the shaft only breaks when it is truly supposed to.

     

    Unmatched Service & After-Sales Support

     

    We stand behind the reliability of your longwall face with a comprehensive service commitment:

    • Custom Torque Calibration: We can adjust the shear-limit specifications to match your specific mining conditions and motor kilowatt ratings.
    • Certified Performance: Every batch is delivered with a Torque Verification Certificate and a 100% Ultrasonic Testing (UT) report for guaranteed integrity.
    • Worry-Free Logistics: We maintain a dedicated "Emergency Inventory" for some shearer models, offering lightning-fast global shipping to minimize your unplanned downtime.
    • Safety Checklist: Shearer Clutch Torque Shaft Installation Follow these 6 steps to ensure the shaft performs as a reliable mechanical fuse.
    • De-Energize & Lock-Out: Ensure the shearer is completely isolated from the power grid.
    • Inspect Clutch Couplings: Check the internal splines of the clutch and the gearbox. Any existing debris or "rolled" splines will prevent the new shaft from seating and may cause premature failure.
    • Verify Part Number: Confirm the "Shear Torque Rating" (etched on the shaft body) matches the machine's technical manual requirements.
    • Anti-Seize Application: Apply a thin layer of high-temperature nickel-based anti-seize to the splines. Do not apply grease to the shear groove itself, as this can trap heat and dust.
    • Alignment Check: Slide the shearer clutch torque shaft in by hand. If a hammer is required, the alignment is off or there is a burr on the splines. Forcing the shaft can pre-stress the shear groove.
    • Seal Inspection: Always replace the O-rings and dust seals on the clutch housing to prevent coal fines from entering the spline interface.

     

    Our "Worry-Free" After-Sales Commitment

     

    Forensic Break Analysis: If a shaft shears, send us high-resolution photos of the fracture surface. Our metallurgists will analyze the grain structure to tell you if the break was due to Instantaneous Overload (a jam) or Torsional Fatigue (a failing gearbox), helping you diagnose the root cause.

     

    FAQ

     

    Q: What is the primary function of the clutch torque shaft?

    A: It transmits power from the drive motor to the gearbox while allowing for the mechanical engagement or disengagement of the cutting or haulage unit

    Q: What are the indicators of worn engagement teeth on a clutch torque shaft?

    A: Common signs include the clutch "slipping" under load and a harsh grinding noise when attempting to engage the drive.

    Q: Why is the axial alignment of the clutch torque shaft so critical?

    A: Precise alignment ensures that the sliding clutch sleeve can move freely without binding or causing uneven wear on the spline teeth.

    Q: What causes the clutch torque shaft to overheat during operation?

    A: Overheating is typically caused by incomplete engagement of the clutch or excessive friction due to contaminated or insufficient lubrication.

    Q: How can you prevent premature failure of the torque shaft's shear section?

    A: Avoid sudden "shock loading" of the machine and ensure the motor's soft-start parameters are correctly calibrated to limit peak torque.

     

    Hot Tags: shearer clutch torque shaft, China shearer clutch torque shaft manufacturers, suppliers, factory, Shearer Clutch Torque Shaft, Shearer Rack Wheel Drive Shaft, Shearer Short Drive Shaft, Shearer Drive Wheel Shaft, Shearer Intermediate Shaft, coal shearer shafts

(0/10)

clearall